Download a 30-Day free trial

HomeDocumentationConfigurationFTP Monitor

2.10. FTP Monitor

FTP Monitor

The FTP monitor connects to a FTP server and then disconnects. 

Login Anonymously:  Check this box to log into the FTP server anonymously.
Use SSL/TLS:  Check this box to connect to the FTP server using SSL/TLS.  The server must be running in SSL/TLS mode.
FTP username:  The FTP username to use.
FTP Password:  The  FTP password to use.
Server Port:  The port the monitor should connect to.  The default FTP port is 21.  Valid port numbers are 1 to 65535.
Retries:  If the monitor fails, this number of times the monitor will attempt to reconnect before notifying you of the failure.  The retry attempts occur at one minute intervals, regardless of the interval setting.  The monitor will report the failure immediately in the Retries value is set to zero.
Interval:  This is the number of minutes between the monitor queries.  It must be between 1 and 1440 (one day).
Timeout:  This is the number of milliseconds before the monitor query is considered a failure.
Monitor Enabled:  Check this box to enable the monitor.

This page was: Helpful | Not Helpful